In order to equip our thermoforming machine series U best situated to your application purpose, we offer various additional optional equipments:

1.     Additional photocell for sheet level.
       more

2.     Photocell control for automatic limiting of pre-blow height.
         more

3.     Built-in, digital working temperature control unit PLASTITHERM 
         II/30Edig. Tool temperature controller with permanent automatic 
         supervision of liquid. Unit with forced 6 kW heating power. 
         Programmable weekly timer for automatic activation of unit.
         more

4.     1) Digital radiation pyrometer, fitted to the top heater to control
         heating time. 
         This remodelled unit no longer requires water supply! 
        more

         2) Digital radiation pyrometer, fitted to the bottom heater to control 
         heating time of the bottom heater.
        more

         3) Digital radiation pyrometer, fitted to frame for controlling cooling
          time.
        more

5.     Quick clamping system for tools
        more

6.     Motorised drive of bottom heater via crank arm; recommended
        when using "FLASH" heaters.
       more

7.     1) Individual valve functions could be made with a servo valve. An 
        exact programmable, reproducible and memorisable setting is then
        available for this function. Examples: table lowering slowly, lower
        plug assist, release, pre-blow.
       more

        2) Vacuum valve as motor control valve specified

8.     Motorised, stepless clamp frame adjustment in both axis (German 
        and European Patent granted).
       more

9.     Stepless, motorised window plate adjustment in both axis.
        (German and European patent). This system is equipped for
        temperature control and has been prepared for usage with sheet
        loader.
       more


10.   to

11.   not available for series U.


12.   Equipment of bottom heater with short element type FAST, 
        size 125 x  63 mm; output 250 watts.
       more

13.   Equipment of top heater with short element type FAST, 
        size 125 x  63 mm; output 250 watts. 
        (for details see option 12.)

14.   Equipment of bottom heater with short element type SUPERFAST, 
         size  83 x  63 mm; output 250 watts.
        (for details see option 12.)

15.   Equipment of top heater with short element type SUPERFAST, 
         size  83 x  63 mm; output 250 watts.
        (for details see option 12.)

16.   1) Equipping both (the top and bottom heater) with halogen
         elements type FLASH, including double the number of elements
         and electronic control of each individual element.
         Please note: heater element type "FLASH" can be used only limited
         for printed surfaces!
         These reputable heater elements have made our single station
          thermoforming machine the most productive on the market.
         more about "FLASH"

16.    2) Equipping both (the top and bottom heater) with the latest
          generation of halogen elements - type SPEEDIUM.
          These exclusively for GEISS designed elements also allow the
          heating of colour printed materials.

17.   Glass ceramic cover for top heater
         (only in connection with option 16.)
        more

18.   Completely automatic central lubrication system with individual
         measured lubrication of all pneumatic cylinders and all other
         important parts requiring lubrication. 
        more

19.   Temperature controlled machine table. It would be
         recommendable to also order the drill hole grid in the machine table
         (option 28.) with this equipment.
        more

20.   Preparation for sheet loader including all necessary additional
         machine preparation to minimize down-time during retro-fit of sheet
         loader.
        more

21.   Front door with pneumatic operated locks for faster access
       more

         1) Front door hinged on left side; locks on right side.

22.   1) Window plate with individual aperture for semi-automatic
         machine.
        more

         2) Window plate suitable for automatic sheet loader (for details
         see option 22.1))

         3) not available for series U.

23.   Vacuum forming course
        more

24.   Teleservice via ISDN-connection by assistance of integrated
         modem.
        more

25.   1) Automatic, programmable ventilation of machine housing.

         2) Suction unit for de-airing system

26.   Motorised, remote control position
        more

27.   Alternatively any set up position can additionally be programmed,
         automatically driven and stored.
        more

28.   Equipment of the machine table with 50 mm crosswise pitch
         thread holes

29.   Integrated digital energy measuring device

30.   Vacuum bypass switching.

31.   Fan cooling assistance via jet system on the clamp frame


32.   to

33.   not available for series U.


34.   Machine pre-take over with customer mould at Geiss plant.

35.   Additional 5/2-way-valve for movement of tool undercuts. This valve 
         can be switched on or off at any time.

36.   Table movement in 2 steps. With this equipment the table drives 
         down to the first step. The lift in the final position will be made after
          "closing clamp frame" of the next cycle.

37.   to 
 
38.   not available for series U.


39.   Quick clamping system for plug assist tools conducted as
         pneumatic bolt in accordance to DIN 69872 Form A for bolts.

40.   Equipment with the so-called "3-K Process".
       more

The PET equipment consists of the following 3 option sections:

41.   For the automatic crystallisation of PET the bottom heater is
         driven twice (also in connection with thermoforming under the
         top heater).

42.   1) Control equipment for tools with electrical heating.

         2) Electrical tool heating split into controlled power circuits with 
         each 1 Pt-100; power 700 W and function control.

43.   Top heater with 2 programmable heater fields.

44.   not available for series U.


45.   The clamp frame and the window plate system, in accordance with
         option 8. and 9.,  are equipped with a programmable and 
         automatically driven axis and storage of data.

46.   not available for series U.

47.   Additional cooling fan including water mist spray cooling.

48.   Amended process of automatic or fitting of an additional special
         function including connection to operator control panel and safety
         process.

49.  not available for series U.

50.   Special colours (RAL) different from our standard livree. The 
         standard machine colour is light-grey RAL 7035 with important
         machine parts being painted in light red-orange RAL2008.

The automatic roll feed equipment consists of the following 6 option sections:

51.   Mount for foil roll with pneumatic pre-take-off, max. roll diameter
         1200 mm.

52.   Pneumatic foil roll lifting for assisting roll changing.

53.   Automatic, motorised foil transport with cross cutter; cutting force
         9400 N. Clearance height 400 mm.

54.   Foil transport by three-phase servo motor and transport step
         regulation.

55.   Preparation of machine for automatic roll feeding. If this
         equipment has not been provided for from the start, when retrofitting
         the roll feeding equipment it will be necessary to exchange the
         complete clamp frame. Also, the draw depth may be reduced
         considerably.

56.   Longitudinal cutter with 2 motorised cutter for trimming of 
         longitudinal edge during foil transport.

Please note: Roll feed is suitable for male forming only! Furthermore you have to note that in connection with the stepless adjustment of window plate is limited regarding the minimum window plate aperture due to the aperture being on the right side.


57.   to

60.   not available at present.


The automatic sheet loader equipment consists of the following options up to 79.:

61.   Automatic sheet loader for automatically loading sheets up to the 
         maximum sheet size of machine.
        more

62.   Pneumatically operated sheet separator equipment for secure
         loading of thinner sheet material from stock.

63.   Automatic positioner for sheet material from the front to the rear.

64.   Automatic positioner for sheet material from the right to the left.

65.   Deioniser for eliminating electro static of sheets and to improve
         separation process, length 800 mm (only in connection with option
         63.). We recommend equipping machine with one unit for each  
         800 mm machine length.

66.   Checking device to ensure only one sheet is loaded. This 
         equipment is recommended for extremely thin and sticking sheets
         to ensure only one sheet is loaded.

67.   not available for series U.

68.   1) Pneumatic pusher for pushing off of formed parts from wagon of
         sheet loader; push off direction: right. Mould height is reduced by
         80 mm. This is the recommended push off direction when adding a
         horizontal bandsaw.

         2) Pneumatic pusher for pushing off of formed parts from wagon of
         sheet loader; push off direction: left. It is possible that 2 machines
         can be placed opposite each other and the formed parts of both
         systems can be pushed off in the same direction.

         3) Pneumatic pusher for pushing off of formed parts from wagon of
         sheet loader; push off direction: front.

         4) Pneumatic pusher for pushing off of formed parts from wagon of
         sheet loader; push off direction: rear.

69.   Under construction for horizontal bandsaw (HBS) for level
         adjustment between sheet loader and saw.

70.   not available for series U.

71.   If the machine is equipped with roll feed device, the level of the 
         sheet loader wagon needs to be lowered so that the formed part
         can be pulled over the table to the dross cutter. This adjustment 
         is carried out automatically when selected.

72.   Alarm photocell for prevention of collision during loading of material
         pallets with forklift.
         Please note: reduction of max. stacking height by 30 mm.

73.   not available at present.


74.   Completely automatic central lubrication system for automatic
         sheet loader with individual measured lubrication of all main
         pneumatic cylinders and all other important parts requiring
         lubrication.

75.   to

79.   not available at present.

80.   to

82.   not available for series U.
        
83.   to
 
90.   not available at present.


The clean room equipment for Class A surfaces consists of the following 2 options:

91.   Basic machine with clean room equipment
        more

        1) Sheet loader machine with clean room equipment
         - same conduction as described under option 91..

92.   Basic machine with clean room equipment - stainless steel
         as alternative to option 91.
        more

         1) Sheet loader machine with clean room equipment
         - stainless steel
         - same conduction as described under option 92..


93.   to

99.   not available at present.

Various spare parts package are available for each machine to ensure that the production process is not interrupted:

100.  Small spare parts package
        more

101.  Large spare parts package 
        more

102.  1) Equipment for air pressure supply line 1" size constisting of 
          maintenance unit including fitting to machine frame and flexible 
          connection to pneumatic cabinet. 

102.  2) Equipment for air pressure supply line 2" consisting of pressure
          regulating valve, water separator and lubricator. Maintenance unit 
          including fitting to machine frame and flexible connection to
          pneumatic cabinet.

These information in Spanish