15.5) Minimum quantity lubrication (Spray cooling system), with external lubrication supply, suitable for trimming materials that require lubrication aids, especially aluminium.
A special alcohol is atomized in a dosing apparatus by a timed pump and a nozzle to produce a fine mist. This fine mist wets the cutting edges of the cutter through a nozzle fitted to the milling spindle.
The capacity of the container is 2,2 litres. The consumption can be set to between 0 and 300 ml per hour.
Upon request a minimum quantity lubrication system for the internal cooling supply through the tooling can be supplied. Even an extremely small amount of coolant is sufficient to prevent a build-up edge on the tool.