Equipping of our portal machine
wih 1000 W laser units, including emission control. The required cooling unit is also including in the specification. Laser units with higher output can be quoted on request.
All machines equipped with a total enclosure (option 9.2)) and motorised front doors (option 9.6)) can be supplied as laser trimming machines.
Regardless of cutting, slitting or perforating, laser processing does not involve any contact and does not require any finishing procedures. Support frames for the products are secured relatively easy in comparison to full size jigs.
The axis paths of the machine on this Equipment are as follows:
X-axis: 2.540 mm
Y-axis: 1.540 mm
Z-axis: 830 mm
B-axis: +/- 110°
C-axis: +/- 220°
The laser machine will be equipped with an exhaust air cleaning system from company Keller Lufttechnik with surface filter Type Vairo 3.3. Extraction power 5.500 m³/h and 100 daPa negative pressure.
A patented dosage apparatus antes up an auxiliary filter coat out of clay dust to the filter membrane. These additional coat protects the filters steadily from gluey substances of the exhaust fumes. The protection coat also adsorbs a high rate of the emitted hydrocarbons of the laser fume. This extends the durability of optional downstream charcoal absorbers.
The inertisation of the intercepted substances also effects an effective fire protection. The piping between machine and extraction has to be planned individually and is therefore not included in this option.