37. 2. Z-axis with B- and C-axis

This equipment allows milling of 2 identical work pieces at one time. The Option with the second Z axis is selected when the batch quantity and the cycle times would otherwise require a second machine which would be much more expensive. 

Please note: The distance between the two Z-axis cannot be changed and must be defined when placing the order.

If the traverse of the machine is to be used optimally for 2 workpieces, the optimum distance for each machine is calculated according to the formula:

• Distance of Z axes = (((basic size of machine - 460)/2) + 430)
  

This formula is true for machines with centre screen.

If the machines are equipped with centre screen according to formula:

• Distance of Z axes = (((basic size of machine - 1770)/4) + 430)

The size of the parts that can be parallel outside contoured in this way is (distance – 430mm).

The traverse of the machine in the X axis is reduced by this distance. In this axis, instead of a GEISS or a CLASSIC milling spindle,  it is possible to install an ultrasound processor or a cold knife. 

The picture shows a machine with 2 Z-axes in operation for the milling of refrigerator bins. The machine has in addition been equipped with linear motors to match the milling cycles to the short cycle times achieved in deep drawing.  

 

 

The picture shows a machine with 2 Z axes and centre screen for fast processing of small parts in the automotive industry.

In this machine the 2 Z axes have been installed as close together as possible. The left-hand Z axis features a milling spindle, the right-hand axis an ultrasonic cutting head acc. to our Option 13.1).

This combination permits components to be processed in a single clamping when both processes are necessary. Any other combination of machining devices is possible. Please contact us.


back